Description
This is the genuine replacement Dualit toaster end element for Proheat 4 Slice Vario toasters. This will not replace LITE model elements.
Dimensions: 140mm x 170mm approx.
These are the new style Pro Heat elements with the mica coating and will replace all old style elements with the exposed wires. Pro Heat elements are bonded with a heat resistant protective Mica coating, this coating must be left in place, do not try to peel it off. Because mica is a natural mineral it is not unusual for elements to have some brown blemishes or slight flaking on the mica coating, this is not a fault with the elements and does not effect the correct operation. Upon the first few uses with new elements they may glow slightly red, make a crackling noise and give off a slight smell, it is advisable to let the elements heat for a while so they settle in before using them with any products in the toaster.
Pro Heat elements replace all old style elements from the past 40 years (exposed wire type) with the exception of what Dualit called Black Heat elements, the Black Heat elements are easily identified as having a rough black stone type finish, these were used for a short period many years ago and are now quite rare, if you have Black Heat elements then there are no modern day replacements. Dualit Pro Heat elements fit the Classic, Vario and New-gen range of toasters, if you have one the new LITE model toasters (Dualit's budget range) spare parts are not available as these are classed as a non-servicable appliance. The Pro Heat elements are slightly longer than the old style elements, the retaining bar that holds the element in place sits under the old style element but in the new style it sits in the V-shaped groove.
Suits:
4 Slice / Slot Dualit Toasters (not LITE models)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.